A directional control method for interface flow considering static voltage stability

A directional control method (DCM) for power flows on a set of interface lines between two regions of power system considering static voltage stability margin is developed in this paper. A surface approximation approach is firstly used to obtain the relationship between the interface flow solution and the generation direction of generator (the portion of generation variation in each participating generator to satisfy the desired power increase on the interface and the system loss). Then, an optimization model is built to determine the optimum dispatching scheme of generators. This method not only can control the total power on the interface to satisfy the power demand but also can realize the directional control of power on each interface line based on the needs of operation. The proposed DCM is further extended to determine the optimum dispatching scheme of generators for maximizing the interface flow margin (IFM), which is the active power margin of the key transmission lines between two regions of power system constrained by static voltage stability. A modified continuation power flow (MCPF) is used to show and evaluate the impacts of the DCM on the IFM. The New England 39-bus system and the IEEE 300-bus system have been employed to verify the effectiveness of the DCM.     

中高压变频器冷却方案比较和选型分析

随着电力电子器件的发展,性能优异的中高压变频器在各行各业中得到越来越广泛的应用,能否处理好变频器的散热问题是其长期稳定运行的关键。分析了中高压变频器热量产生来源,并从技术可行性、可靠性、经济性等角度对不同冷却方案的特点进行比较,并结合实际的工程案例,给出合理的变频器冷却方案选型建议,可作为工程电气设计时中高压变频器冷却方案选型参考。     

Application of differential evolution for cascaded multilevel VSI with harmonics elimination PWM switching

Harmonic elimination pulse width modulation (HEPWM) method has been widely applied to multilevel voltage source inverter (MVSI) to remove low frequency harmonics from its output voltage. However, the computation of the HEPWM switching angles for MVSI is very challenging due to several constraints, namely angle sequencing, very tight angular spacing and the numerous possibilities of angles distribution ratio. Realizing the potential of Differential Evolution (DE) to handle complex problems, this work proposes its application to solve the HEPWM problem for cascaded MVSI. Its emphasis is on improving the availability of HEPWM for higher output voltage by extending the maximum range of modulation index (M). It also removes the discontinuities in the switching angles and reduces the number of distribution ratio required to obtain the required solution. Compared to the most advanced (similar) work, i.e., 7-level MVSI with seventeen switching angles, DE covers a wider range of M; the maximum achievable M is 2.80. Furthermore, it exhibits very low second order distortion factor (DF₂): for the worst case, the value of DF₂ is 0.0014%. To verify the viability of the proposed algorithm, simulation is carried out and hardware prototype is constructed. Both results show very good agreement with the theoretical prediction.     

基于关键路径延时检测的自适应电压缩减技术

为了减小传统的最差情况设计方法引入的电压裕量,提出了一种变化可知的自适应电压缩减(AVS)技术,通过调整电源电压来降低电路功耗.自适应电压缩减技术基于检测关键路径的延时变化,基于此设计了一款预错误原位延时检测电路,可以检测关键路径延时并输出预错误信号,进而控制单元可根据反馈回的预错误信号的个数调整系统电压.本芯片采用SMIC180 nm工艺设计验证,仿真分析表明,采用自适应电压缩减技术后,4个目标验证电路分别节省功耗12.4％,11.3％,10.4％和11.6％.     

A novel fault detection method for VSC-HVDC transmission system of offshore wind farm

VSC-HVDC transmission system is going to become the most economical way of power delivery for large and remote offshore wind farms. An accurate and fast fault detection method is necessary to protect sensitive devices of these systems and maintain uninterrupted power delivery. This paper investigates an innovative technique for recognizing DC zone faults including HVDC cable faults and unbalancing of DC capacitor bank. Sheath voltage is presented as a novel criterion for detecting abnormal situations in the system. Transient voltage of cable sheath and Wavelet transform are used to identify different types of DC faults. Extensive simulation examples are performed on EMTDC–PSCAD platform and post-processed using MATLAB. The results illustrate that the proposed technique gives a robust performance and can be applied to protection scheme of offshore wind farms.     

Design and performance study of phase‐locked loop using fractional‐order loop filter

The present work reports the realization of an analog fractional‐order phase‐locked loop (FPLL) using a fractional capacitor. The expressions for bandwidth, capture range, and lock range of the FPLL have been derived analytically and then compared with the experimental observations using LM565 IC. It has been observed that bandwidth and capture range can be extended by using FPLL. It has also been found that FPLL can provide faster response and lower phase error at the time of switching compared to its integer‐order counterpart. Copyright © 2014 John Wiley & Sons, Ltd.     

一款紧凑增强型可变阻抗电磁带隙结构

基于传统AI-EBG结构,提出了一种小尺寸的增强型电磁带隙结构,实现了从0.5~9.4 GHz的宽频带-40 dB噪声抑制深度,且下截止频率减少到数百MHz,可有效抑制多层PCB板间地弹噪声。文中同时研究了EBG结构在高速电路应用时的信号完整性问题,使用差分信号方案可改善信号完整性。     

巨型水电站孤岛试验期间AVC电压波动的解决

本文首先分析国内典型的AVC的一般配置、控制策略和控制原理,针对巨型水电站孤岛试验期间的AVC控制的复杂工况进行阐述,对出现的AVC电压波动的情况进行分析,并对采用的解决方案进行介绍,为今后类似电站的孤岛运行期间的AVC电压控制提供一些参考建议。     

Compensation of droop control using common load condition in DC microgrids to improve voltage regulation and load sharing

DC microgrid is one feasible and effective solution to integrate renewable energy resources, as well as to supply reliable electricity. The control objective of DC microgrids is to obtain system stability, low voltage regulation and equal load sharing in per unit. The droop control is an effectively method adopted to implement the control of microgrids with multiple distributed energy units. However in the application of low-voltage DC microgrids, the nominal reference mismatch and unequal cable resistances require a trade-off to be made between voltage regulation and load sharing. In this paper, a unified compensation framework is proposed using the common load condition in local controller, to compensate the voltage drop and load sharing errors. The voltage deviation is compensated with a P controller while the load sharing is compensated through a PI controller. An additional low bandwidth communication is introduced to share the output current information, and the average output current in per unit is generated to represent the common load condition. The performance of the proposed method is analyzed and compared with basic droop control and hierarchical structure method. The large signal stability is analyzed to define the margin of compensation coefficients. Simulations and experiments are carried out to verify the performance of the proposed method.